Complementarity between micro-micro and micro-macro entanglement in a Bose–Einstein condensate with two Rydberg impurities

We theoretically study complementarity between micro-micro and micro-macro entanglement in a Bose–Einstein condensate with two Rydberg impurities. We investigate quantum dynamics of micro-micro and micro-macro entanglement in the micro-macro system. It is found that strong micro-macro entanglement between Rydberg impurities and the BEC can be generated by the use of initial micro-micro entanglement between two Rydberg impurities, which acts as the seed entanglement to create micro-macro entanglement. We demonstrate a curious complementarity relation between micro-micro and micro-macro entanglement, and find that the complementarity property can be sustained to some extent even though in the presence of the BEC decoherence.     

Interplay of local resonances and Bragg band gaps in acoustic waveguides with periodic detuned resonators

This letter is concerned with acoustic wave propagation and transmission in acoustic waveguides with periodically grafted detuned Helmholtz resonators. The interplay of local resonances and Bragg band gaps in such periodic systems is examined. It is shown that, when the resonant frequencies of the resonators are tuned close to a Bragg band gap, the behavior of the Bragg band gap can be affected dramatically. Particularly, by introducing appropriately tuned resonators, the bandwidth of a Bragg band gap can be reduced to zero, leading to a very narrow pass band with great wave attenuation performance near both band edges. The band formation mechanisms of such periodic waveguides are further examined, providing explicit formulae to locate the band edge frequencies of all the band gaps, as well as the conditions to achieve very narrow pass bands in such periodic waveguides.     

Phase field modeling precipitation of β-phase and mechanical properties change in Zr–Nb alloys under neutron irradiation

ABSTRACT

We study microstructure transformation in Zr–Nb system under neutron irradiation and its mechanical properties change under mechanical loads in a form of shear deformation by using phase field methodology. The developed phase field approach takes into account defects dynamics based on reaction rate theory and elastic contribution to study mechanical properties change. A numerical modeling is provided in three stages: sample preparation, irradiation of the prepared sample and mechanical loading of the irradiated sample. A precipitation of β-Niobium particles of the size of several nanometers is discussed. Results of phase field modeling indicate that β-Niobium particles grow slowly during irradiation due to point defects rearrangement. Statistical analysis of dynamics of radiation-induced microstructure transformations is provided. Simulation results of shear deformation of pre-irradiated and post-irradiated alloys are discussed. Maps of local distribution of strain and stress and strain–stress curves are obtained. Results are verified with experimental data.     

Voltage control of millimeter-wave ferromagnetic resonance in multiferroic heterostructures thin films

Multiferroic heterostructures thin films, SrBi₂Ta₂O₉/BaFe₁₂O₁₉ (SBT/BaM), were grown on Pt/TiO₂/SiO₂/Si substrates by using magnetron sputtering and Sol-gel ways. X-ray diffractometer (XRD) analysis showed that only SBT and BaM phases appeared in the multiferroic heterostructures. Magnetic hysteresis loops revealed that the saturated magnetization was 3.7 kG and the M-H characteristics of SBT/BaM were not influenced by the presence of the SBT layer. Ferromagnetic resonance (FMR) measurement showed the lowest FMR linewidth of 205 Oe at 50 GHz. Additionally, when direct-current electric field was applied to SBT layer, as a result of which mechanical deformation of the ferromagnetic layer occurred that leads to a frequency shift in ferromagnetic resonance and the magnetoelectric coupling effect (α) is 1.8 MHz*cm/kV. Our findings indicate that these SBT/BaM thin films have a significant potential for the usage in millimeter wave tunable devices.     

Analysis,design and simulation of MIM plasmonic filters with different geometries for technical parameters improvement

In this paper, four optical filter topologies based on metal–insulator–metal waveguides are proposed and the designed structures are investigated numerically using finite-difference timedomain method. Triangular-shaped adjunctions have been added to the filter structures to improve their transmission spectrum. These improved structures consist of air as the insulator and silver as the metal. The relative permittivity of metal has been described via the Drude,Drude–Lorentz, and Palik models. The first filter's transmission spectrum shows an acceptable transmittance. In the second optimized filter, the transmission spectrum has been improved. The transmittance spectrum can be tuned through adjusting the edge of the triangle in these four optimized filters. As a result, the bandwidths of resonance spectra can be adjusted. The theory of such tapered structures will be investigated by the tapered transmission line and will be solved with the transfer matrix method. This method shows a better performance and higher transmission efficiency in comparison with the basic structures. On the other hand, the final filter has been chosen as the best one because of its hexagonal resonator. The main reason for having a better result is due to a longer interaction length in comparison with the circular resonator. This in turn creates much better energy coupling and results in higher transmission.     

基于图像处理的光学谐振腔自准直研究方法

针对我国氧碘化学激光器输出能量不断提高的情况下,主要限制光束质量的因素之一是出光过程中的光腔失调,提出了一种基于图像处理的光学谐振腔自准直研究方法。该研究方法利用氦氖穿腔光通过凹腔镜中心孔,并在凸腔镜后方放置工业相机,在屏幕上方形成一个干涉同心圆环。通过借助OpenCV库中二值化、霍夫圆检测等图像处理的方法,获得干涉同心圆环的圆心坐标,再通过以圆心为中心将图像分成上下左右四个部分,通过判断这四部分亮点像素的数量差值来预估干涉同心圆环的偏移状态,进而获得空腔条件下光学谐振腔发生变化的理论判据。实验结果表明,该方法可以获得相当精准的光学谐振腔失调判据,其失调判据选取左右亮点像素差值30000,上下亮点像素差值45000,为今后失调判据与步进电机自动调腔的结合做好充足的准备。     

第三族金属氧化物离子对二氧化碳转化的红外光谱研究

本文利用红外光解离光谱研究了第三族金属氧化物离子对二氧化碳分子的转化机制. 研究表明，对于[ScO(CO₂)_n]⁺体系，在n≤4时，形成了溶剂化结构；在n=5时，形成了碳酸盐结构，实现了二氧化碳的转化. 对于[YO(CO₂)_n]⁺体系，需要4个二氧化碳分子就可以实现二氧化碳的转化. 而在[YO(CO₂)_n]⁺体系中，只发现了溶剂化结构，没有观察到碳酸盐结构. 理论计算表明，[YO(CO₂)_n]⁺体系拥有最小的溶剂化结构向碳酸盐结构转化能垒，[LaO(CO₂)_n]⁺体系拥有最大的溶剂化结构向碳酸盐结构转化能垒. 本文从分子水平揭示了不同金属氧化物离子对二氧化碳分子转化的影响规律.     

Multifunctional Sulfur-Hyperdoped Silicon Nanoparticles with Engineered Mid-Infrared Sulfur-Impurity and Free-Carrier Absorption

Si nanoparticles (NPs), which are innovative promising light-harvesting components of thin-film solar cells and key-enabling biocompatible theranostic elements of infrared-laser and radiofrequency hyperthermia-based therapies of cancer cells in tumors and metastases, are significantly advanced in their near/mid-infrared band-to-band and free-carrier absorption via donor sulfur-hyperdoping during high-throughput facile femtosecond-laser ablative production in liquid carbon disulfide. High-resolution transmission electron microscopy and Raman microscopy reveal their mixed nanocrystalline/amorphous structure, enabling the extraordinary sulfur content of a few atomic percents and very minor surface oxidation/carbonization characterized by energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy. A 200-nm thick layer of the nanoparticles exhibits near−mid-infrared absorbance, comparable to that of the initial 380-micron thick n-doped Si wafer (phosphor-dopant concentration ≈10¹⁵ cm⁻³), with the corresponding extinction coefficient for the hyperdoped NPs being 4–7 orders higher over the broadband spectral range of 1–25 micrometers. Such ultimate, but potentially tunable mid-IR structured, multi-band absorption of various sulfur-impurity clusters and smooth free-carrier absorption are break through advances in mid-infrared (mid-IR) laser and radiofrequency (RF) hyperthermia-based therapies, as envisioned in the RF-heating tests, and in fabrication of higher-efficiency thin-film and bulk photovoltaic devices with ultra-broad (UV−mid-IR) spectral response.     

Acoustic radiation force on an elastic cylinder in a Gaussian beam near an impedance boundary

Acoustic radiation force (ARF) is studied by considering an infinite elastic cylinder near an impedance boundary when the cylinder is illuminated by a Gaussian beam. The surrounding fluid is an ideal fluid. Using the method of images and the translation-addition theorem for the cylindrical Bessel function, the resulting sound field including the incident wave, its reflection from the boundary, the scattered wave from the elastic cylinder, and its image are expressed in terms of the cylindrical wave function. Then, we deduce the exact equations of the axial and transverse ARFs. The solutions depend on the cylinder position, cylinder material, beam waist, reflection coefficient, distance from the impedance boundary, and absorption in the cylinder. To analyze the effects of the various factors intuitively, we simulate the radiation force for non-absorbing elastic cylinders made of stainless steel, gold, and beryllium as well as for an absorbing elastic cylinder made of polyethylene, which is a well-known biomedical polymer. The results show that the impedance boundary, cylinder material, absorption in the cylinder, and cylinder position in the Gaussian beam significantly affect the magnitude and direction of the force. Both stable and unstable equilibrium regions are found. Moreover, a larger beam waist broadens the beam domain, corresponding to non-zero axial and transverse ARFs. More importantly, negative ARFs are produced depending on the choice of the various factors. These results are particularly important for designing acoustic manipulation devices operating with Gaussian beams.